http://www.model-co.com/us/index.asp us dayly 1 CHA is a hydraulic grab mounted on crawler crane. The grab is totally instrumented, and is fitted with systems to monitor and real time correction of verticality of excavation, in 2 or 3 axis, (x,y,z). The grab can rotate 360º around its vertical axis, what is a guarantee of verticality of excavation.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/hydraulic_grabs/cha_diaphragm_wall_hydraulic_rig.aspMP200-300 grab is a very compact hydraulic grab to excavate diaphragm Wall in very restricted access sites and reduced dimensions working platforms. The grab has all advantages as the larger grabs, like the 360º swing around its vertical axis, to guarantee verticality of excavation.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/hydraulic_grabs/mp200_300_diaphragm_wall_hydraulic_rig.aspMPK-300 is a guided gab by telescopic Kelly bar. It is possible to instrument the grab to monitor verticality of excavation.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/hydraulic_grabs/mpk_300_diaphragm_wall_hydraulic_rig.aspCHS8 is a full performance hydraulic grab, sturdy design, 360º swing rotation, high jaw closing force, etc. The advantage that it can be installed in a standard excavator machine. The transportation is very simple, there is no need to dismantle any special item but the grab itself.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/hydraulic_grabs/chs8_diaphragm_wall_hydraulic_rig.aspCMX grab is the largest grab in the market, of weight uo to 30 ton. It has patentes rescue systems and double rope line opening. The production rate in very high, much higher than the biggest hydraulic grabs of the market, this is due to the extremely high jaw closing force, up to 1200 KNm. The grab is made of high yield steels and wear resistant steels. It can dig in very tough soil reaching aceptable production rates, even in rocky soils where no other grab i sable to dig. There is a special CMX version for rock with extra reinforced jaws and stressed parts.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cmx_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cmp_diaphragm_wall_mechanical_grab.aspCMSP grab, as all MODEL&CO grab, allow installation of special clamps to guide the grab by inserting them along flat stop-end joint.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cmsp_diaphragm_wall_mechanical_grab.aspCMS is a sturdy grab, medium size, able to achieve aceptable production rates, It is designed for medium sized cranes 40-60 ton, having a winch line pull of at least 12-16 ton.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cms_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cmsl_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cml_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cm4_diaphragm_wall_mechanical_grab.aspCML300 grab is designed to dig with minimum width of 300 mm, thus offering a solution to carry out diaphragm Wall in very restricted sites, where project requires to install a diaphragm Wall taking the least room possible in basements.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cml300_diaphragm_wall_mechanical_grab.aspCMC grab is a very reduced height grab, to allow for diapragm wall excavation in places where ceiling loading gauge is very low.]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cmc_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/stop_end_pipe_extractors/round_stop_end_pipes_extractor/het600_800_round_stop_end_pipe_extractor.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/stop_end_pipe_extractors/round_stop_end_pipes_extractor/het1000_1500_round_stop_end_pipe_extractor.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/stop_end_pipe_extractors/flat_stop_end_pipes_extractor/hep1000_flat_stop_end_pipe_extractor.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/power_pack/gd40_power_pack.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/power_pack/gd60_power_pack.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/power_pack/gd100_power_pack.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_round_stop_end_pipes/round_stop_pipe.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_round_stop_end_pipes/round_stop_end_pipe_central_pin.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_round_stop_end_pipes/round_stop_end_pipe_double_pin.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_round_stop_end_pipes/round_stop_end_pipe_perimeter_bolts.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_flat_stop_end_pipes/flat_angular_stop_end_joint.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_flat_stop_end_pipes/flat_semicircular_stop_end_joint.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/chisels/cross_chisel.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/chisels/rectangular_chisel.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/tremie_pipes_implements/tremie_pipes.asphttp://www.model-co.com/us/foundation_equipment/piling/continuous_flight_auger_cfa/bf10_continuous_flight_auger_cfa.asphttp://www.model-co.com/us/foundation_equipment/piling/continuous_flight_auger_cfa/bl10_continuous_flight_auger_cfa.asphttp://www.model-co.com/us/foundation_equipment/piling/continuous_flight_auger_cfa/bf15_continuous_flight_auger_cfa.asphttp://www.model-co.com/us/foundation_equipment/piling/bored_piles/rf4s_bored_piles.asphttp://www.model-co.com/us/foundation_equipment/piling/bored_piles/rf4_bored_piles.asphttp://www.model-co.com/us/foundation_equipment/piling/bored_piles/rf6_bored_piles.asphttp://www.model-co.com/us/foundation_equipment/piling/rotary_heads/bc10_bc15_rotary_head.asphttp://www.model-co.com/us/foundation_equipment/piling/rotary_heads/r4s_rotary_head.asphttp://www.model-co.com/us/foundation_equipment/piling/rotary_heads/rt4_rotary_head.asphttp://www.model-co.com/us/foundation_equipment/piling/drilling_tools/piling_augers/augers.asphttp://www.model-co.com/us/foundation_equipment/piling/drilling_tools/piling_buckets/buckets.asphttp://www.model-co.com/us/foundation_equipment/piling/drilling_tools/piling_core_barrels/core_barrels.asp CMR pile grab or hammer grab is a versatile grab, that can be fitted to jaw of any diameter higher than 980 mm. The weight of grab can be increased up to 8-10 ton. Jaw closing is done by 2 ropes, so as to guarantee optimal filling of jawys, and aslo improving the excavation efficiency, due to being able to open and close jaws freely at operator will.]]>http://www.model-co.com/us/foundation_equipment/piling/drilling_tools/piling_hammer_grabs/cmr_mechanical_hammer_grab.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/mini_desanders/md25_mini_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/mini_desanders/md45_mini_desander.aspmini desanders is specially designed to be used in small diameter drilling, such as geothermal, survey drilling, anchors, minipiles, water well drilling, etc. With totally autonomous working, since the power source is from ready installed diesel engine. The main feature is the extremely compact design, to easy handling together with small drilling equipment, as well as be able to work in very restricted access sites.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/mini_desanders/md45t_mini_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md60_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md120_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md120s_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md160d_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md250d_standard_cycloning_desander.aspMD190D is a very popular model in deep foundations since it combines a easy transportation with a very high capacity of treatment. Double cycloning circuit achieve an improved performance and separation efficiency. MODEL&CO double cycloning Desanders have a nominal flow to work in double cycloning circuit, however if inlet flow exceeds the nominal flow, then the flow pass automatically to secondary circuit, so that the machine can work fully as a simple cycloning desander, and the capacity would be the addition of both capacities, primary + secondary circuits.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_double_cycloning/md190d_double_cycloning_desander.aspDouble cycloning circuit achieve an improved performance and separation efficiency. MODEL&CO double cycloning Desanders have a nominal flow to work in double cycloning circuit, however if inlet flow exceeds the nominal flow, then the flow pass automatically to secondary circuit, so that the machine can work fully as a simple cycloning desander, and the capacity would be the addition of both capacities, primary + secondary circuits.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_double_cycloning/md220d_double_cycloning_desander.aspDouble cycloning circuit achieve an improved performance and separation efficiency. MODEL&CO double cycloning Desanders have a nominal flow to work in double cycloning circuit, however if inlet flow exceeds the nominal flow, then the flow pass automatically to secondary circuit, so that the machine can work fully as a simple cycloning desander, and the capacity would be the addition of both capacities, primary + secondary circuits.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_double_cycloning/md350d_double_cycloning_desander.aspDouble cycloning circuit achieve an improved performance and separation efficiency. MODEL&CO double cycloning Desanders have a nominal flow to work in double cycloning circuit, however if inlet flow exceeds the nominal flow, then the flow pass automatically to secondary circuit, so that the machine can work fully as a simple cycloning desander, and the capacity would be the addition of both capacities, primary + secondary circuits.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_double_cycloning/md450d_double_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/desilters/ds20_desilter.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/desilters/ds120_desilter.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_mixers/m16_mud_mixer.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_mixers/m20_mud_mixer.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_mixers/mv20_mud_mixer.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/p160e_mud_pump.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/p160d_mud_pump.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/p160dv_mud_pump.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/p180ev_mud_pump.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/p180dv_mud_pump.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_preparation/mac_grout_preparation_equipment.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_preparation/mal_grout_preparation_equipment.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_preparation/ma2c_grout_preparation_equipment.aspgrouting pump P100PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing techniques.]]>http://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_med_pressure/p100pe_grout_injection_equipment.aspgrouting pump P101PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing techniques.]]>http://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_med_pressure/p101pe_grout_injection_equipment.asppump P200PE is suitable to pump the flushing mud of any drilling that requires a high flow and a medium pressure. It is also suitable to inject cement grout, since flow can always be decreased to very low figures.]]>http://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_med_pressure/p200pe_grout_injection_equipment.aspP153PE pump is meant to inject water or cement grout at high pressure and flow. The main application is operation of water driven Down the Hole Hammers, jet-grouting, etc.. Grouting parameters are fully controlled by computer, pressure, flow, volume, etc.]]>http://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_high_pressure/p153pe_grout_injection_equipment.aspGS grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_standard/gs80_standard_grouting_set.asppacker inflation pump WP10 is designed for fast and efficient inflation and deflation of grouting packers. It is totally made of aluminum and stainless steel, and the design is very compact. The pumping fluid is water, pumping pressure can be adjusted to the specific inflation conditions of any packer. The system Works automatically, the WP10 keeps always the preselected water pressure, and it is able to feed various packer at same time. As packers take water in, the system pressure drops, so the pump starts automatically to raise pressure again. Packer inflation is instantaneous, aprox 1 sec, without any struggle for operator. The water return system is also automatic, a constant vacuum of 98% is kept in the return water way, so that the packer deflation is the quickest physically possible, aprox 5-6 sec. The deflation water returns to original water tank, thus closing circuit.]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_packers/wp10_grouting_packer_equipment.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_accessories/cd23_perforation_platform_engineering_foundation.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/auxiliar_equipment/telescopic_mud_tanks.aspCME grab is designed to excavate diapragm wall panels of very small length, min 2400 mm]]>http://www.model-co.com/us/foundation_equipment/diaphragm_wall/mechanical_grabs/cme_diaphragm_wall_mechanical_grab.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_mixers/m16d_mud_mixer.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_flat_stop_end_pipes/water_stop_end_joint_ws.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_med_pressure/p120pe_grout_injection_equipment.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_med_pressure/p140pe_grout_injection_equipment.aspGS grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_standard/gs100_standard_grouting_set.aspGS grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_standard/gs120_standard_grouting_set.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_high_capacity/gs140_grouting_set.aspGS grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_standard/gs_modular_standard_grouting_set.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/mini_desanders/md12_mini_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md500_modular_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/standard_desanders/md600_standard_cycloning_desander.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_simple_cycloning/mini_desanders/md120r.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/desilters/ds250.asphttp://www.model-co.com/us/foundation_equipment/grouting/data_logging/gm2.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_mixers/mv5.asphttp://www.model-co.com/us/foundation_equipment/grouting/grout_injection/grout_pump_high_pressure/p116pe.aspGS80S grouting set is a compact and manual control machine. The main application is the injection of micropiles and anchors or any other application where grout injection is required. Also can be used as a flushing pump for self drilling bar.]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_manual_med_pressure/gs80s.aspGS100S grouting set is a compact and manual control machine. The main application is the injection of micropiles and anchors or any other application where grout injection is required. Also can be used as a flushing pump for self drilling bar.]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_manual_med_pressure/gs100s.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_manual_low_pressure/mai80.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_manual_low_pressure/mai70.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_mortar_sets/mgs100.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/submersible_p180se.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/mud_pumps/ep25.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/recycling_plants/rm_recycle_mix.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/recycling_plants/rmp45.asphttp://www.model-co.com/us/foundation_equipment/drilling_muds/recycling_plants/rmp120.asphttp://www.model-co.com/us/foundation_equipment/diaphragm_wall/diaphragm_wall_implements/implements_flat_stop_end_pipes/stop-end-round-shaft-joint.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_high_capacity/gs140-2000_grouting_set.asphttp://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_high_capacity/gs260-3500_grouting_set.asphttp://www.model-co.com/us/foundation_equipment/drilling_rigs/mini_pill_drill_rigs/minitrack80.aspMD190C is a very popular model in deep foundations since it combines a easy transportation with a very high capacity of treatment. Double cycloning circuit achieve an improved performance and separation efficiency. MODEL&CO double cycloning Desanders have a nominal flow to work in double cycloning circuit, however if inlet flow exceeds the nominal flow, then the flow pass automatically to secondary circuit, so that the machine can work fully as a simple cycloning desander, and the capacity would be the addition of both capacities, primary + secondary circuits.]]>http://www.model-co.com/us/foundation_equipment/drilling_muds/mud_desanders/desanders_double_cycloning/md190c_double_cycloning_desander.aspGSB80 grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_compact/gsb80_compact_standard_grouting_set.aspGSB100 grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_compact/gsb100_compact_grouting_set.aspGSB120 grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_compact/gsb120_compact_grouting_set.aspGsgrouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_enclosed/gsc80_enclosed_grouting_set.aspGSC100 grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_enclosed/gsc100_enclosed_grouting_set.aspGSC120 grouting set is a compact machine. The main application is the compensation grouting through pipes fitted with valves (tube a manchette, TAM), grout intensity number (GIN), LUGEON, compaction grouting, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing pump for drilling operations and also Soil Mixing, techniques]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_computer_auto/gs_computer_auto_enclosed/gsc120_enclosed_grouting_set.aspGS120S grouting set is a compact and manual control machine. The main application is the injection of micropiles and anchors or any other application where grout injection is required. Also can be used as a flushing pump for self drilling bar.]]>http://www.model-co.com/us/foundation_equipment/grouting/grouting_sets/gs_manual_med_pressure/gs120s.asphttp://www.model-co.com/us/foundation_equipment/piling/continuous_flight_auger_cfa/bl20_continuous_flight_auger_cfa.asp